Sheet · Weight calculator
Thin flat sheet.
1. Product type
Profiles
Sheet and plate
2. Dimensions
3. Alloy and density
The kg/m values in the EAS standard profile catalogue are calculated with 2.70. For sheet and plate the common 1050 alloy is 2.71.
Sheet weight calculation formula
Thin flat sheet.
kg = W(m) × L(m) × t(mm) × ρ
L = length · ρ = density (g/cm³)
For profiles the volume is cross-section area × length; for sheet and plate it is width × length × thickness. The cross-section areas here come from the same geometry engine that draws the catalogue sections, verified against the kg/m values of 1,949 catalogue profiles.
Example: a 3000 × 1500 × 1 mm plate → 3 × 1.5 × 1 × 2.71 = 12.195 kg. For 234 pieces, 2,854 kg.
Results are theoretical; production tolerance, surface treatment (anodising/coating) and cutting allowance are not included.
Density by alloy
| Alloy | Density | Typical use |
|---|---|---|
| 6063 (T5 / T6) | 2.70 g/cm³ | Extruded profile |
| 6060 | 2.70 g/cm³ | Extruded profile |
| 6061 | 2.70 g/cm³ | Extruded profile |
| 6082 | 2.70 g/cm³ | Extruded profile |
| 6005 / 6005A | 2.70 g/cm³ | Extruded profile |
| 1050 / 1050A | 2.71 g/cm³ | Sheet / plate / coil |
| 1100 | 2.71 g/cm³ | Sheet / plate / coil |
| 3003 | 2.73 g/cm³ | Sheet / plate / coil |
| 3105 | 2.72 g/cm³ | Sheet / plate / coil |
| 5005 | 2.70 g/cm³ | Sheet / plate / coil |
| 5052 | 2.68 g/cm³ | Sheet / plate / coil |
| 5754 | 2.66 g/cm³ | Sheet / plate / coil |
| 5083 | 2.66 g/cm³ | Sheet / plate / coil |
| 2024 | 2.78 g/cm³ | Special alloy |
| 7075 | 2.81 g/cm³ | Special alloy |
Weight calculation for other products
Flat barRadiused flat barSquare barRound barHexagon barFlat oval barRound tubeSquare tubeRadiused square tubeRectangular tubeRadiused rectangular tubeOval tubeAngle (L profile)Equal angleU profile (channel)T profileH profileZ profileHexagon tubeHexagon tube with a circular borePlateCoilTread plate (chequer)