Flat oval bar · Weight calculator
Solid profile with semicircular ends and straight sides.
The kg/m values in the EAS standard profile catalogue are calculated with 2.70. For sheet and plate the common 1050 alloy is 2.71.
Flat oval bar weight calculation formula
Solid profile with semicircular ends and straight sides.
L = length · ρ = density (g/cm³)
For profiles the volume is cross-section area × length; for sheet and plate it is width × length × thickness. The cross-section areas here come from the same geometry engine that draws the catalogue sections, verified against the kg/m values of 1,949 catalogue profiles.
Example: a 3000 × 1500 × 1 mm plate → 3 × 1.5 × 1 × 2.71 = 12.195 kg. For 234 pieces, 2,854 kg.
Results are theoretical; production tolerance, surface treatment (anodising/coating) and cutting allowance are not included.
Density by alloy
| Alloy | Density | Typical use |
|---|---|---|
| 6063 (T5 / T6) | 2.70 g/cm³ | Extruded profile |
| 6060 | 2.70 g/cm³ | Extruded profile |
| 6061 | 2.70 g/cm³ | Extruded profile |
| 6082 | 2.70 g/cm³ | Extruded profile |
| 6005 / 6005A | 2.70 g/cm³ | Extruded profile |
| 1050 / 1050A | 2.71 g/cm³ | Sheet / plate / coil |
| 1100 | 2.71 g/cm³ | Sheet / plate / coil |
| 3003 | 2.73 g/cm³ | Sheet / plate / coil |
| 3105 | 2.72 g/cm³ | Sheet / plate / coil |
| 5005 | 2.70 g/cm³ | Sheet / plate / coil |
| 5052 | 2.68 g/cm³ | Sheet / plate / coil |
| 5754 | 2.66 g/cm³ | Sheet / plate / coil |
| 5083 | 2.66 g/cm³ | Sheet / plate / coil |
| 2024 | 2.78 g/cm³ | Special alloy |
| 7075 | 2.81 g/cm³ | Special alloy |